Türkçe | English
Slide 1 Slide 1 Slide 1 Slide 1 Slide 1
Example Frame

Ürünler / Bakır İletkenli Kablo Tip Kodları


A-BCDEFGHIJKLMN

A Basic Types
A- - Outdoor telephone cables
J- - Installation cables
AJ- - Outdoor cable with protection against inductive influences
T- - Terminating cable

B Insulation Types
02Y - Cellular PE
2Y - Solid PE
02YS - Foam Skin Insulating cover of cellular PE with additional skin of solid polyethylene.
Y - PVC
H - LSZH

C Filling
F - Petroleum jelly filling
Blank - Unfilled

D Screening Material
(St) - Static shield of plastic-backed aluminum Tape for indoor cables
D - Shield of copper wire whipping over one stranding element (e.g. pair)
LR - Corrugated aluminum tape
Blank - No screen

E Bedding Material
2Y - PE
Y - PVC
H - LSZH
M - Lead Sheath
MZ - Special Alloyed Lead Sheath
Blank - No Bedding

F Armoring Material
b - Armoring
SR - Corrugated steel tape
T - Messenger of galvanized steel wires.
Blank - No Armor

G Sheath Material
2Y - PE
Y - PVC
H - LSZH
(L)2Y - Laminated sheath (shield of PE coated aluminum
tape bonded with PE sheath).
M - Lead Sheath
MZ - Special Alloyed Lead Sheath
Blank - No Sheath

H Number of Pairs/Quads
2x2 - 2 Pairs
2x4 - 2 Quads
I Conductor Size
0.4 - 0.4mm
0.5 - 0.5mm
0.6 - 0.6mm
0.8 - 0.8mm
0.9 - 0.9mm

J Stranding Element
PiC - Pairs shielded with copper braid
PiMF - Pairs shielded with aluminum/polyester tape
St - Star Quad(Phantom)
StI - Star Quad(trunk cable)
StIII - Star Quad (local cable)
TIC - Triple shielded with copper braid
TiMF - Triple shielded with aluminum/polyester tape

K Cable Type
S - Railway signaling cable

L Types of Stranding
Lg - Stranded in layers
Bd - Unit Type stranding

M Copper/Steel Tape/Braid Screen Options
(…..Cu) - Total cross section of copper shield in mm sq
(fK) - Longitudinally applied copper tape, supplement to (St)
2B…- two layers of steel tape, thickness of steel tape in mm

N Fire Resistance Options
E30 - 30mins circuit integrity according to DIN VDE 4102
Part 12
E60 - 60mins circuit integrity according to DIN VDE 4102
Part 12
F180 - 950°C 180mins Insulation integrity according to IEC
60331&VDE 0427-814